As we all know, the engine is an important part of the car structure, but the engine also has small parts that need to ensure the normal operation of the car engine. The engine connecting rod is one of them. It is a very important part for the engine, so why does such a small part play such a big role? The following are some structural features of the engine connecting rod.
Fanghe Machinery
The connecting rod connects the piston and the crankshaft and is a rod-shaped component. Its function is to withstand the huge pressure of the piston and be transmitted to the crankshaft, and the crankshaft moves in a circle. The connecting rod is composed of three parts: the small head, the rod body, and the big head of the connecting rod. The small head and the connecting rod are as a whole, with a bronze bushing hole, connected to the piston pin of the piston; it is subjected to the cross-section of the I-shaped shaft, which can reduce the quality of the connecting rod under the condition of strength and rigidity; the upper half of the upper and lower connecting rods are cast integrally with the shaft, and the lower connecting rod bearing cap is bolted to the upper half.
In order to ensure that the big end of the connecting rod can be pulled out smoothly, two semicircular connecting rod bearings are connected to the gap between the two forms of connecting rods and a bevel cut to reduce the friction of the crank pin, and the running surface bearing has an inclined alloy layer. The rod and the bearing cover stopper are generally located between the three forms of positioning and positioning of the serrated positioning sleeve, which ensures accurate engagement. The following introduces the specific functions of the three components.
1. The small end of the connecting rod. The small end of the connecting rod and the piston pin are used as floating structures. When the engine piston pin and the small end of the connecting rod can rotate relatively freely, the wear of the pin in the longitudinal direction and the circumferential direction is more uniform. In order to improve the wear resistance of friction, the pressure in the bronze bushing of the small end of the connecting rod is reduced, and the head group hole is provided. The rotation of the crankshaft oil is thrown up and the piston at the top of the piston cavity is cooled, and the lubricating oil returns through the piston pin and drips into the small end of the connecting rod.
2. Rod body. When the engine is small in mass, it also has a certain strength and rigidity, and the connecting shaft is processed into a "work" form.
3. Connecting rod big end: The connecting rod is connected to the crankshaft crank pin and the main body is a simple form of a flat cutout that is split.






