Home > News > Content

Classification Of Scraper Loaders

Nov 04, 2024

 

According to the travel mode
According to the travel mode, they are divided into self-propelled and towed types [4]. Self-propelled scraper loaders are composed of a tractor and a bucket truck, which are connected in the middle by a hinge pin. Both the tractor and the bucket truck are single-axle. Their economic transport distance can reach more than 1,500 meters. They have the advantages of compact structure, high maneuverability and high driving speed, and are widely used. They are further divided into:
① Single-axle - the weight of the scraper and the weight of the soil in the bucket are partially transmitted to the tractor through the traction device;
② Double-axle - the tractor does not bear the weight of the scraper and the weight of the soil in the bucket.

Towed scraper loaders need to be towed by a tractor and are equipped with wide-base low-pressure tires. They are suitable for hilly areas with soft soil. Their economic transport distance is generally 50 to 500 meters. Due to their poor maneuverability, they are rarely used in engineering.
According to the number of engines, they can be divided into:
Single-engine - driven by one engine;
Dual-engine - driven by two engines, front and back respectively.
According to the number of axles, it can be divided into: two-axle type - powered by a special single-axle tractor; three-axle type - powered by a special double-axle tractor.
Unloading by bucket
According to the bucket unloading method, it can be divided into three types: forced unloading, semi-forced unloading and free unloading.
Forced unloading relies on the movable rear wall of the bucket to push forward, forcibly push out the soil, and unload the soil cleanly, but the power consumption is large;
The rear bucket wall of semi-forced unloading is connected to the bottom of the bucket as a whole. When unloading the soil, the bottom of the bucket and the rear bucket wall flip forward together, and the crushed soil is unloaded under the dual action of thrust and gravity, and the soil between the two side walls can be unloaded cleanly;
Free unloading relies on the entire bucket to flip forward to pour out the crushed soil, which cannot guarantee the unloading of the soil, but the power consumption is low and is used for small scrapers.
According to the bucket capacity
Scrapers are divided into four types according to the bucket capacity: small, medium, large and extra-large. The capacity of medium-sized buckets is generally 6~15m³, large ones are generally 15~30m³, and extra-large ones can reach more than 30m³.
According to the type of traveling device
(1) Wheeled scraper; (2) Crawler scraper
According to the soil loading method
(1) Open bucket loading; (2) Chain loading
According to the operation method
(1) Wire rope; (2) Hydraulic

Send Inquiry